Size of headphone jack on a laptop

Posted onCategoriesUncategorized

This topic is locked from further discussion.

6.5mm is used for voor audio, it’s the standard for profesional Vinal Decks and alot of good hoe amplifyers comes with them. They’re mainly used becasue it’s the same cork for any professional musical device, profesional mikes, electrified guitars, keyboards all use the same 6.5mm jack. The idea being that you only need one type of cablingand if you wire them into a mixing desk there is no difference inbetween a guitar channel and a mike channel spil far spil the desk is worried. This also applies for profesional speakers and good hifi speakers so top end headphones generally use the same cork too so you don’t need another type of output buttplug. Top end inpput and outputs need the fatter butt-plug spil there is too high a current for a puny jack to cope with.

Te the US measurement system:

6.5mm is used for voor audio, it’s the standard for profesional Vinal Decks and alot of good hoe amplifyers comes with them. They’re mainly used becasue it’s the same ass-plug for any professional musical device, profesional mikes, electrical guitars, keyboards all use the same 6.5mm jack. The idea being that you only need one type of cablingand if you wire them into a mixing desk there is no difference inbetween a guitar channel and a mike channel spil far spil the desk is worried. This also applies for profesional speakers and good hifi speakers so top end headphones generally use the same cork too so you don’t need another type of output cork. Top end inpput and outputs need the thicker ass-plug spil there is too high a current for a puny jack to cope with.

markop2003 Just to be clear, 6.5mm or 1/Four” jacks are not all the same. Spil pointed out it is a standard size but the signals carried overheen them is not and plugging something higher powered into sensitive equipment can ruin the equipment. Example, guitar output is generally 1/Four” but needs to go through a DI opbergruimte to be stepped down before going into a mixer or other device expecting “line level” signals. Even worse would be plugging a speaker output which carries many times the power into anything other than a speaker. Nowadays powered speakers which have their own amplifiers built te would even get fried if you plugged a normal amplified speaker output into them which is I believe why they generally don’t have 1/Four” inputs, just XLR. With XLR, you can assume at least you aren’t dealing with amplified signals. Most pc speakers are powered speakers with either usb, battery or AC power which is why a Three.5mm butt-plug works for them.

6.5mm is used for professional audio, it’s the standard for profesional Vinal Decks and alot of good hoe amplifyers comes with them. They’re mainly used becasue it’s the same cork for any professional musical device, profesional mikes, electrified guitars, keyboards all use the same 6.5mm jack. The idea being that you only need one type of cablingand if you wire them into a mixing desk there is no difference inbetween a guitar channel and a mike channel spil far spil the desk is worried. This also applies for profesional speakers and good hifi speakers so top end headphones generally use the same butt-plug too so you don’t need another type of output butt-plug. Top end inpput and outputs need the fatter buttplug spil there is too high a current for a puny jack to cope with.

bruncleb Just to be clear, 6.5mm or 1/Four” jacks are not all the same. Spil pointed out it is a standard size but the signals carried overheen them is not and plugging something higher powered into sensitive equipment can demolish the equipment. Example, guitar output is generally 1/Four” but needs to go through a DI opbergruimte to be stepped down before going into a mixer or other device expecting “line level” signals. Even worse would be plugging a speaker output which carries many times the power into anything other than a speaker. Nowadays powered speakers which have their own amplifiers built ter would even get fried if you plugged a normal amplified speaker output into them which is I believe why they generally don’t have 1/Four” inputs, just XLR. With XLR, you can assume at least you aren’t dealing with amplified signals. Most laptop speakers are powered speakers with either usb, battery or AC power which is why a Trio.5mm cork works for them.

Related movie: Bitcoin.com – Very Extraordinaire Mining Pool on a Growing List of Contenders


Leave a Reply

Your email address will not be published. Required fields are marked *